A Reliable Garage Door has all types of doors to meet your Garage Door needs. This is a newly installed garage door in La Mesa from Elegant Custom Garage Doors. Elegant produces any type of door you need for your home projects, and with A Reliable Garage Door you know it’s going to be installed professionally, quickly and affordably. Contact Us today for more information.
Material: 1-3/4″ thick extruded 6063-T6 non corrosive commercial-grade
Sections: Height of section determined by height of door
Top rail width – 4-5/8″
Bottom rail width – 4-5/8″
Combined intermediate rail widths – 4-1/4″
Center stile width – 2-7/8″ End stile width- 4-5/8″
Section Joints: Standard tongue & groove
Assembly: Stiles are through bolted to the rails added rigidity and strength
Maximum door width: 18ft
Maximum door height: 14ft.
Finish
Aluminum is sent through a chemical process that leaves it with an extremely durable anodizing finish
Glass
Glass Size Capabilities: Three options of glass thickness available 1/8″ / 1/4″ / 1/2″
Standard Options: Clear Tempered / Frosted Tempered / White Laminate
*specialty glass available upon request to match a style of your home *Please Note: All glass is tempered except for laminated options.Glazing is completed using a butyl tape that adheres the glass to the frame and provides a high quality seal
Aluminum retainers are snapped in place with a 1/4″ EPDM round foam strip between the glass and aluminum retainer acting as another seal and impact dampener
Track
All 2″ tracks are 12″ or 15″ Radius – 14 gauge horizontals with 17 gauge verticals
All tracks are mounted with reverse continuous jamb angle
Horizontals are reinforced with 13 gauge angle mounted continuous to the length of the horizontal
All 3″ tracks are 15″ Radius – 12 gauge and use is determined by weight of door
Options: Low Headroom (0″ or 3.5″ ), High Lift, Vertical Lift, Follow the Pitch
Hardware
All components are galvanized steel and consist of 14 gauge hinges, 12 gauge top & bottom fixtures
2″ nylon 10 ball bearing rollers with long-stem for top & bottom fixtures and short-stem for hinges
Inside lock included
Counterbalance
Springs are oil tempered and calibrated per door weight, size and track requirements
Standard springs are 10,000 cycle
25k, 50k, 100k cycle springs are available with an additional cost.
12 guage bearing & spring plates
16 gauge torsion tube is standard, 14 gauge, 11 gauge and solid shafts are available and used when specified
Weather Seal
4″ bulb type bottom weather-seal is standard, 6″ available.
